Champion RGB Sabers (Golden Harvest 3.33)

Golden Harvest user files, updates, and editing guide - Link

Saber Operation 

Basic Gestures/Functions

[SWING] - Move saber back and forth

[TWIST] - Twist saber back and forth like a bike handle, using wrist

[CLASH] - Impact to blade/saber

[STAB] – Point blade away from body, quickly jab outwards. 

Out of the box

Your Champion RGB saber will arrive semi-charged and in Deep Sleep Mode. Tap the power button to exit Deep Sleep Mode and enter Standby Mode.

  • Standby Mode is when the saber is awake but the blade is not lit.

  • Active Mode is when the saber is on and the blade is lit. 

  • Deep Sleep Mode is when your saber has been in Standby Mode for five (5) minutes.

Your Champion RGB saber will return to Deep Sleep Mode automatically after remaining in Standby Mode for five (5) minutes.

While Blade is active:

 Control Effect Additional Info
Press Button Blaster Deflect
Hold button, twist saber, release button Force Push
Hold button for two (2) seconds, release button, twist saber Lock Up Tap button to end Lock Up
Point saber downward, hold button for 2 seconds, release and twist saber Drag Tap button to end Drag
Thrust saber forward in jabbing motion. Stab
Hold button for two (2) seconds, release button and preform Stab Melt Tap button to end Melt
Hold button and Stab Activate Power Saving Mode Repeat to disable
Hold button for 2 seconds, release button, tap button Enter color profile menu/Change blade color
  • Twist saber back and forth to cycle through color profiles

  • Point blade tip up when twisting to cycle color profiles forward

  • Point blade tip down when twisting to cycle color profiles backwards

To confirm, hold the button for two (2) seconds. Sound will play to confirm selection/menu exit

Hold button for two (2) seconds, release button, hold button for two (2) seconds. Enter effects menu/Change blade effects
  • Twist saber to cycle through blade profiles

  • Tap button to cycle through on top effects

  • Point blade tip up when twisting/tapping to cycle effects forward

  • Point blade tip downwards while twisting/tapping to cycle effects backwards

There are 10 blade effects to choose from.

To leave effects menu or confirm effects choice, hold button for two (2) seconds. Sound will play to confirm selection/menu exit

Point saber blade downwards, hold button for two (2) seconds and release. Change ignited/standby accent LED profiles (only for sabers with accent LEDs)

Ignited accents profiles determine how your sabers accent LEDs will behave while in active mode.

Standby accents profiles determine how your sabers accent LEDs will behave while in standby mode.

  • Tap button to cycle through ignited accent profile options

  • Hold button for two (2) seconds to confirm profile choice and/or advance to standby accent profile options

  • Hold button for two (2) seconds during standby accent options to leave menu

While blade is not active (standby mode):

 Control Effect Additional Info
Press Button Activate Saber
Point your saber blade up, hold button for two (2) seconds and then release the button. Sound menu/Change sound font
  • Twist saber back and forth to cycle through sound fonts one (1) at a time

    • Tap button to cycle through fonts five (5) at a time

  • Point blade tip up when twisting/tapping to cycle sound fonts forward

  • Point blade tip down when twisting/tapping to cycle sound fonts backwards

To leave sound menu or confirm sound font choice, hold button for two (2) seconds. A sound will play to confirm selection/menu exit

Point your saber blade downwards and hold the button for two (2) seconds before releasing Volume control menu/Adjust volume level This will activate the volume control menu. Twist saber to adjust volume level. To confirm volume selection and exit volume menu, tap button.
Hold button down and stab saber Battery level indicator

Audio cue will play to confirm battery level indicator is active. Listen to audio for current battery level.

While Battery level indicator is active, stab saber Calibrate battery For best results only calibrate your battery after fully charging

Your Champion RGB saber arrives with the battery fully calibrated. Calibration helps your saber accurately track your current battery level.
Hold button for 10 seconds, release when LEDs begin flashing Reset saber When your lightsaber resets, the LEDs in your saber blade will begin to flash. Once reset is complete, the LEDs will stop flashing and the boot sound of the last active sound font will play.
Point saber blade downwards and hold button. Twist saber. Saber editor menu

Editing options changes depending on which tier of saber you have.

  • Tap button to cycle through saber editor options

  • Point saber blade upwards to cycle forward through editor options

  • Point saber blade downwards to cycle backwards through editor options

  • Hold button for two (2) seconds to choose saber editor option

To leave saber editor menu, navigate to “Save and leave saber editor” option and hold down button for two (2) seconds to confirm selection.

Sound Fonts

Hero (and champion) sabers now offer 24 soundfonts. Below is a list of the pre-installed fonts.

Soundfont Created By Sample
Balance LordBlako
Psy-Borg CrystalSoniX
Daddy Issues Fonts by Fourzze
Guardian LDN Sabers
Cryo Carbon LINK
Peace Kyberphonic Fonts
Violence Kyberphonic Fonts
Son of Darkness Dark Path Media
The Eternal Prince LINK
The Phantom Project Fonts
The Shadow Project Fonts
Shadows Echo Studios
The Classic Villain Fonts by Fourzze
Energy Pike The Proplicator
Fulcrum Unknown
Prodigal Son Unknown
Dark Side Relic Unknown
Frozen Winds Unknown
Heirloom Unknown
Ominous Unknown
Rangers Blade Unknown
Ruiner Unknown
The Master Unknown
Cyber Assassin Unknown


Basic Editing Guide Here

Hero Default Files - Hero RGBA.zip (498M)

    Troubleshooting

    My blade is blinking white and does not respond to any button taps. How can I fix that?

    The white blinking indicates that your microSD card is not inserted properly or some files or folders are missing on it.

    There is no sound or stuttering sound. How can I fix that?

    Please recharge your saber.

    For older versions, see below:

    Version 3.32