Champion Tier Sabers (Golden Harvest 3.33)

Golden Harvest user files, updates, and editing guide - Link

Important Information

-Please use the provided accessories for charging your saber

-Do not raise the factory volume settings located in the general.txt file on your saber. If you wish to adjust the volume of your saber please utilize the [volume control menu]

-Do not leave saber in Active Mode while connected to a charger

-Your saber must be in Standby Mode before connecting to a PC

-Copy the contents of your sabers SD card to your PC before making any edits to your saber via PC

-Always charge your saber before making edits to your saber via PC, or updating your sabers firmware

While Blade is active:

 Control Effect Additional Info
Press Button Blaster Deflect
Hold button, twist saber, release button Force Push
Hold button for two (2) seconds, release button, twist saber Lock Up Tap button to end Lock Up
Hold button for two (2) seconds, release button while saber blade tip is pointed down. Drag Tap button to end Drag
Thrust saber forward in jabbing motion. Stab
Hold button for two (2) seconds, release button and preform Stab Melt Tap button to end Melt
Hold button and Stab Activate Power Saving Mode Repeat to disable
Hold button for two (2) seconds, release button, hold button for two (2) seconds. Enter effects menu/Change blade effects
  • Twist saber to cycle through blade profiles

  • Point blade tip up when twisting/tapping to cycle effects forward

  • Point blade tip downwards while twisting/tapping to cycle effects backwards

There are 10 blade effects to choose from.

To leave effects menu or confirm effects choice, hold button for two (2) seconds. Sound will play to confirm selection/menu exit

Point saber blade downwards, hold button for two (2) seconds and release. Change ignited/standby accent LED profiles (only for sabers with accent LEDs)

Ignited accents profiles determine how your sabers accent LEDs will behave while in active mode.

Standby accents profiles determine how your sabers accent LEDs will behave while in standby mode.

  • Tap button to cycle through ignited accent profile options

  • Hold button for two (2) seconds to confirm profile choice and/or advance to standby accent profile options

  • Hold button for two (2) seconds during standby accent options to leave menu

While blade is not active (standby mode):

 Control Effect Additional Info
Press Button Activate Saber
Point your saber blade up, hold button for two (2) seconds and then release the button. Sound menu/Change sound font
  • Twist saber back and forth to cycle through sound fonts one (1) at a time

    • Tap button to cycle through fonts five (5) at a time

  • Point blade tip up when twisting/tapping to cycle sound fonts forward

  • Point blade tip down when twisting/tapping to cycle sound fonts backwards

To leave sound menu or confirm sound font choice, hold button for two (2) seconds. A sound will play to confirm selection/menu exit

Point your saber blade downwards and hold the button for two (2) seconds before releasing Volume control menu/Adjust volume level This will activate the volume control menu. Twist saber to adjust volume level. To confirm volume selection and exit volume menu, tap button.
While Battery level indicator is active, stab saber Calibrate battery For best results only calibrate your battery after fully charging

Your Champion saber arrives with the battery fully calibrated. Calibration helps your saber accurately track your current battery level.
Hold button for 10 seconds, release when LEDs begin flashing Reset saber When your lightsaber resets, the LEDs in your saber blade will begin to flash. Once reset is complete, the LEDs will stop flashing and the boot sound of the last active sound font will play.
Point saber blade downwards and hold button. Twist saber. Saber editor menu

Editing options changes depending on which tier of saber you have.

  • Tap button to cycle through saber editor options

  • Point saber blade upwards to cycle forward through editor options

  • Point saber blade downwards to cycle backwards through editor options

  • Hold button for two (2) seconds to choose saber editor option

To leave saber editor menu, navigate to “Save and leave saber editor” option and hold down button for two (2) seconds to confirm selection.

Champion (and Hero) sabers now offer 24 soundfonts. Below are the included sound fonts and their original creators.

Soundfont Created By Sample
Balance LordBlako
Psy-Borg CrystalSoniX
Daddy Issues Fonts by Fourzze
Guardian LDN Sabers
Cryo Carbon LINK
Peace Kyberphonic Fonts
Violence Kyberphonic Fonts
Son of Darkness Dark Path Media
The Eternal Prince LINK
The Phantom Project Fonts
The Shadow Project Fonts
Shadows Echo Studios
The Classic Villain Fonts by Fourzze
Energy Pike The Proplicator
Fulcrum Unknown
Prodigal Son Unknown
Dark Side Relic Unknown
Frozen Winds Unknown
Heirloom Unknown
Ominous Unknown
Rangers Blade Unknown
Ruiner Unknown
The Master Unknown
Cyber Assassin Unknown

 

Basic Editing Guide Available Here

Champion Default Files - Champion.zip (498M) 

    TROUBLESHOOTING

    My blade is blinking white and does not respond to any button taps. How can I fix that?

    The white blinking indicates that your microSD card is not inserted properly or some files or folders are missing on it.

    There is no sound or stuttering sound. How can I fix that?

    Please recharge your saber.

     

    PREVIOUS FIRMWARE

    For older firmware versions, see below:

    version 3.32