TXQ RGB Guide
Press and hold LED button to wake saber from sleep mode. A 'power on' audio clip will play to confirm that the saber is awake. To activate saber, press the activation button again.
The following table provides a list of commands you can activate using the saber. TXQ sabers with lit activation switches will flash every second while held. However, some TXQ sabers we carry do not have an illuminated activation switch. To help with this issue, we've provided hold timings along with LED flashes.
While Blade is active:
Control | Effect | Additional Info |
---|---|---|
Press Button | Blaster Deflect | |
Hold for 1 LED Flash / 1 Second | Lock-up | Press button once to end lock-up |
Hold for 2 LED Flashes / 2 Second | Activate color change | Press button to change blade color. Hold for 1 led flash / 1 second to lock color |
Hold for 3 LED Flashes / 3 Seconds | Activate quick color change | As colors change, press button again to lock color |
Hold for 4 LED Flashes / 4 Seconds | Deactivate saber blade | Saber will return to wake state |
While blade is not active (wake mode):
Control | Effect | Additional Info |
---|---|---|
Hold Button | Wake Saber | Wake saber from sleep mode |
Press Button | Activate Saber | |
Hold for 1 LED Flash / 1 Second | Volume Adjust | Can be set to high, low, and mute |
Hold for 2 LED Flashes / 2 Second | Change Soundfont | Audio clip will play confirming new font is active |
Hold for 3 LED Flashes / 3 Seconds | Activated BGM | Enables background music. Repeat to change song. Three options available. |
Hold for 4 LED Flashes / 4 Seconds | Flash-on-clash Toggle | Enables or disables impact effect |
Hold for 6 seconds | Sleep Mode | Saber will sleep automatically if idle for 10 minutes |