Champion Tier Sabers (Golden Harvest v3)

Last Updated: October 23 2020 

Firmware Update v3.32 (PDF with download links) - Available Here 

Blade Installation Guide

Saber Operation 

Out of the box

Your Champion saber will arrive semi-charged in deep sleep mode. Press the power button to turn on the saber and enter standby mode. Standby mode is when the saber is on but the blade is not lit. Active mode is when the blade is lit. 

Standby Mode

[Power On] To turn on the saber tap the power button. When the blade is lit, this is called active mode in this guide. To turn off the saber, hold the power button for 3 seconds or until the saber turns off. This will return your saber to standby mode.

[Change Sound Font] - Hold button until audio plays to cycle to the next font. There are 13 preinstalled fonts. This is only available in standby mode.

Note: Pointing the saber up or down will change sound font progression forwards or backwards.

Note: After some inactivity in standby mode, the saber will return to deep sleep.

Active Mode

[Blaster Block] - Tap button for .5 seconds and the saber will play audio and flash.

[Force Push] - Hold button while twisting the saber (doorknob motion )  parallel to the ground. An audio clip will play while the blade shimmers.

[Saber Stab] - Hold saber parallel to the ground and use a stabbing motion to activate the effect.

[Activate Lock-Up effect] - Hold button for 2 seconds then tap button for .5 seconds. A flash of colors and sounds will play to simulate a saber blade lock-up effect. If there is too much time between button holds, the saber will not activate Lock-Up

[Deactivate Lock-Up effect] - Tap button for .5 seconds and the saber will return to the base active mode.

[Power Down] - Hold button until the blade turns off. This will return you to standby mode.

Effects Menu (While in Active Mode)

[Activate Effects Menu] - While in active mode Hold button for 2 seconds. Release quickly, then immediately hold again for 2 seconds. There will be an audio cue. If there is too much time between button holds, the saber will not enter the Effects Menu.

[Change blade effect] - Tap button to change flicker/pulse effects. Continue tapping to change effect.

Note: Pointing the saber up or down will change progression forwards or backwards.

[Exit Effects Menu] - Hold button for 2 seconds or until audio plays. You will hear the same audio cue that was used to enter the Effects Menu.

Sound Fonts

Below are the sound fonts and their original creator as the appear chronologically.

  1. "Balance" (LordBlako)

  2. "Psy-Borg" (CrystalSoniX)
  3. "Daddy Issues" Complete (Fonts by Fourzze)
  4. "Guardian" (LDN Sabers)
  5. "Cryo Carbon" (LINK)
  6. "Peace" (Kyberphonic Fonts)
  7. "Violence" (Kyberphonic Fonts)
  8. "Son of Darkness" (Dark Path Media)
  9. "The Eternal Prince" (LINK)
  10. "The Phantom" (Project Fonts)
  11. "The Shadow" (Project Fonts)
  12. "Shadows" (Echo Studios)
  13. "The Classic Villain" (Fonts by Fourzze)

Basic Editing Guide Available Here

[Advanced customization Guide coming soon]



    My blade is blinking white and does not respond to any button taps. How can I fix that?

    The white blinking indicates that your microSD card is not inserted properly or some files or folders are missing on it.

    There is no sound or stuttering sound. How can I fix that?

    Please recharge your saber.

      Have more questions or need assistance?

      Get help from our customer service staff. Write us a detailed e-mail and we'll respond as soon as possible

      Contact Us

      Ways to get in touch with us

      Product Info and Online Orders

      9am to 6pm (PST) Tuesday - Friday

      Showroom/Local Orders

      12pm to 8pm (PST) Monday - Sunday

      Visit Us

      Showroom & Headquarters

      270 Beavercreek Rd STE 200

      Oregon City OR 97045