Veteran Tier sabers

Saber Operation

Activation/Power Down

Remove the kill key located below the activation switch. Once the LED lights and audio cue plays, tap (quick press) the switch to activate the saber.

To power down the saber, simply hold the power led (long press) until the saber turns off.

Saber FX

Fonts feature different effect when you tap the power button while the blade is active.

Changing Soundfonts

While the saber is powered down (kill key still removed), hold the activation button for 1.5 seconds or until the first audio cue plays, then release the button. Your saber is now in the next soundfont and can be activated by a quick press.

Changing Saber Settings

While the saber is powered down (kill key still removed), hold the activation button for 3 seconds or until the second audio cue plays, then release the button. Your saber is now in the settings menu.

There are 4 settings. Each setting accepts a long press (accept current option and move to next setting) and a short press (next option). The settings and options are as follows:

Saving Settings

Settings are automatically saved once you complete all 4 settings options. Settings will not save if the battery dies or you plug in a charger or kill key while in the settings menu.

Charging

Simply plug the charger into the saber charge port by removing the kill key located below the activation switch. Do not try to remove the battery via the pommel as it is secured internally to the soundboard and chassis.

Soundfonts

Below are the 8 soundfonts installed on our Veteran sabers.

Troubleshooting

LED is dim, audio is off or shutting down automatically

These issues are generally a response to the battery being low but having enough power to still power on. Simply recharge the saber, and this should resolve these issues.